Planar SD2020 Manual de usuario descargar pdf (Pagina 12)

SD2020 | 7 | User's Guide

Connect the cables

The SD2020 unit comes with one 6-foot DVI cable, one 12-foot DVI cable, and

one 14-inch DVI cable.

1. Plug one end of the 6-foot DVI

cable into the primary port of

the dual-channel DVI graphics

card. Plug the other end into

the bottom monitor of the

SD2020 unit.

2. Plug one end of the 14-inch DVI

cable into the secondary output

of the dual-channel graphics

card. Plug the other end into

the input port (labeled “IN”) of

the mirror-flip PCI card.

3. Plug one end of the 12-foot DVI

cable into the output port of the

mirror-flip PCI card (labeled “OUT”).

Plug the other end into the top

monitor of the SD2020 unit.

The two monitors must be connected with an off-the-shelf video

cable to comply with FCC regulations. Ferrite-core interface

cables are provided. This device will not be in compliance with

FCC regulations when a non-ferrite-core video cable is used.

Short DVI cable installed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Planar SD2020 Manual de usuario Pagina 12